去骨钻

去骨钻

一， Product Information 产品信息

去骨钻

应用：

刃状牙槽嵴骨阻挡，愈合基台不能下到底时，去骨钻可以用来移除种植体周边骨。

现货尺寸φ4.7   φ6.1

现货尺寸φ4.5   φ5.2   φ7.0

二，Products Description 产品说明

专业特殊、非标、异型、新产品、任意种类、形状、公差的超硬加工。

※     如有类似，可FAX地址，来电索取图片中的样品及相关样本资料供参考（只限小金额）※

常年備存原材料、半成品、成品 3000萬 ~ 4000萬RMB周转的在庫品，依圖依樣現生產，具有極強的性價比……欢迎实地指导。

常规常备材料：超高防锈高耐磨不锈钢（AA）（HRC54°±2°断面)

深槽至顶、可堆屑至槽顶。（可黑色、黄色、全亚光、全亮光、部分亚光+部分亮光等表面处理）

① 2刃常用规格系列：刃径Φ0.80mm～Φ5.50mm之间系列任意尺寸之规格

   3刃常用规格系列：刃径Φ0.80mm～Φ7.95mm之间系列任意尺寸之规格

   4刃常用规格系列：刃径Φ2.0mm～Φ7.95mm之间系列任意尺寸之规格

② 所有刃数常规刃长长可至55mm系列，总长可至65mm系列的任意阶梯、锥度角度、形状、锋利性要求加工的。

③ 规为10°~12°螺旋刃，可为锋利螺旋刃、挤光螺旋刃、钝化螺旋刃或前锋利后钝化螺旋刃等结构方式。

1. 刃径常用系列:Φ0.80mm～Φ7.95mm之间系列任意尺寸之规格。

2.  常规刃长长可至55mm系列，总长可至65mm的任意阶梯、锥度角度、形状、锋利性要求加工的。

可超硬、超精研磨，任意的柄部类型、芯厚、容屑槽宽度、刃背方式、钻尖方式、内冷却孔方式、刃部结构、刃口角度、刃口锋利程度之要求，及高可至±0.003mm （3μm）的尺寸公差要求  

三，Material / Characteristics  材质/特性

UNS S42000  

（超高防锈不锈钢A⁺） （淬硬处理HRC60°±2°断面）

高防锈、高锋利度、超高耐磨不锈钢，具有超高的耐磨耗（超高硬度）性能及高标准的防锈、耐腐蚀性能，相应一般不锈钢具有2~3倍的使用寿命，切削刃切割锋利性保持时间超长。无标示下5%中性盐雾实验（ ASTM  B117）符合FDA高标准时间约300小时后无生锈现象，如重复使用、手术后建议能及时清洁烘干处理。

应用范围广，耐磨性、锋利性表现优异，可生产极为复杂、高精密的柄部形状及成型的超锋利刃部结构。

Bone Harvesting Drill Kit

Application: Bone Harvesting Drill Kit can be used to remove the peripheral bone when healing abutment can't be to bottom completely due to knife-edge alveolar ridge bone barrier.

 Stock sizes: φ4.7, φ6.1

Stock sizes: φ4.5, φ5.2, φ7.0

二，Products Description 产品说明

Regular stock material: Ultra-high anti-rust & high wear-resistant stainless steel (AA)(HRC54°±2°Section)

Deep groove to top, chip accumulation to the crest. (It can be with black, yellow, full matt, full shiny, partial matt + partial shiny and other surface treatment)

①   2-flute commonly-used specification: Any size series of edge diameter between Φ0.80mm～Φ5.50mm

     3-flute commonly-used specification: Any size series of edge diameter betweenΦ0.80mm～Φ7.95mm

     4-flute commonly-used specification: Any size series of edge diameter between Φ2.0mm～Φ7.95mm

②   The series with regular number of flutes, but cutting length up to 55mm and total length

       up to 65mm, processed with any step, taper angle, shape, sharpness requirements.

③   The conventional 10°~12°helical edge can be sharp, burnishing, passivated, or

       front-sharp but rear-blunt.

1.  Commonly-used edge diameter: any size series between Φ0.80mm～Φ7.95mm

2.  Conventional cutting length up to 55mm series,and total length up to 65mm, processed with any step, taper angle, shape, sharpness requirements

We can produce with super hard and super finish grinding and satisfy your requirement of any type of shank, web thickness, width of chip flute, land, drill tip, inner cooling hole, structure of cutting edge, angle of cutting edge, degree of sharpness of cutting edge, and the dimension tolerance can be up to ±0.003mm （3μm）

三，Material / Characteristics  材质/特性

UNS S42000 

(Super-high rust-proof stainless steel A⁺) (hardened HRC60°±2°Section)

Ultra-high anti-rust, high-sharpness and super-high wear-resistant stainless steel, with super-high wear resistance (super high hardness) performance and high standards of rust and corrosion resistance. It has a service life of 2 ~ 3 times longer than that of general stainless steel. The cutting edge keeps for a super-long time of cutting sharpness. Unmarked, with 5% Neutral salt spray test (ASTM B117), it doesn't rust after 300 hours, which meet FDA high standard. If for repeated use, it is recommended to clean and dry it in time after every surgery.

Wide range of applications. With excellent abrasion resistance and sharpness, it can be used to produce extremely complex, high-precision handle shapes and formed super-sharp edge structures.