精镗刀片,连杆镗床刀,压缩机连杆镗刀头,连杆精镗刀片

精镗刀片,连杆镗床刀,压缩机连杆镗刀头,连杆精镗刀片

 

专业特殊、非标、异型、新产品、任意种类、形状、公差的超硬加工。

※ 如有类似，可FAX地址，来电索取图片中的样品及相关样本资料供参考（只限小金额）

※ 常年備存原材料、半成品、成品 2000萬 ~ 3000萬RMB周转的在庫品，依圖依樣現生產，具有極強的性價比……欢迎实地指导

 

 

超精研磨成型治具，平面度、平直度、直线度及厚度公差可完全满足贵司对产品的要求（超高耐磨型/高耐冲击用/高精密度）

 

依图依样依要求可现生产超长超宽超厚、高精密度、形状极为复杂的成型制品。

 

长度L=5mm~6500mm系列，宽度B=2mm~800mm系列，厚度T=0.10mm~120mm系列

1.被加工件最小厚度可至T= 0.20~0.06mm（最大厚度可至800mm以上）。

2.被加工件最小直径可至φD=φ0.006（最大直径可至φ600mm以上）。

3.被加工件最长的长度可至L=6500mm（最短长度不限）。

4.平面度、平行度∥、精度公差高可至 0.005mm  ~0.002mm～0.001mm系列。

5.被加工件厚度公差高可至T±0.002mm~±0.001mm～±0.0005mm系列。

6.表面粗糙度 高可至0.2μm~0.1μm~0.05μm~0.01μm系列。

 

 

 true boring cutter,Connecting Rod Boring Machine Cutter,Connecting Rod Boring Machine Cutter,Connecting rod true boring cutter

 

Super-hard processing of professional, special, non-standard, special shaped and  new  products with any kind, any shape and tolerance.

※If you have any similar inquiry, please fax us your address or call us to get samples in the photos and related catalogue for your reference (only a small amount is allowed). ※

We keep around RMB 20～30 Million turnover stock articles such as raw material ,semi-     products, finished products in ordinary year , we are capable to produce according to     drawing or sample provided by customer, so as to present you a favorable cost-performance ratio…Welcome to visit our factory。

 

we can produce super long-wide-thick、high precision、complex profiling products according to requirements of drawings & samples.

(Super high wear-resistance /high impact-resistance/high precision)

 

  Length L=5mm~6500mm series, Width B=2mm~800mm series, Thickness T=0.10mm~120mm series,

  Flatness can be

1. Machined work piece's minimum thickness is up to T= 0.20~0.06mm(and its maximum thickness is up to more than 800mm)

2. Machined work pieces' minimum diameter is up to φD=φ0.006 ( and its maximum diameter is up to more thanφ 600mm.)

3. Machined work pieces' maximum length is up to 6500mm (there is no limit for minimum length)

4. Flatness, parallelism, precision tolerance can be up to 0.005mm  ~0.002mm～0.001mm high.

5. Machined work piece's thickness tolerance is up to T±0.002mm~±0.001mm～±0.0005mm.

6. Surface roughness can be  up to 0.2μm~0.1μm~0.05μm~0.01μm high .