多功能工具,钳刀折叠刀,组合钳子,户外装备尖嘴钳,刀钳,瑞士军刀

多功能工具,钳刀折叠刀,组合钳子,户外装备尖嘴钳,刀钳,瑞士军刀

可以依图依样镜面研磨加工任意材种，形状、特殊、异型、精度公差之产品。

镜面超锋利刃口之研磨

超精研磨成型治具，平面度、平直度、直线度及厚度公差可完全满足贵司对产品的要求

（超高耐磨型/高耐冲击用/高精密度）

依图依样依要求可现生产超长超宽超厚、高精密度、形状极为复杂的成型制品。

长度L=5mm~6500mm系列，宽度B=2mm~800mm系列，厚度T=0.10mm~120mm系列

1.被加工件最小厚度可至T= 0.20~0.06mm（最大厚度可至800mm以上）。

2.被加工件最小直径可至φD=φ0.006（最大直径可至φ600mm以上）。

3.被加工件最长的长度可至L=6500mm（最短长度不限）。

4.平面度、平行度∥、精度公差高可至 0.005mm   ~0.002mm～0.001mm系列。

5.被加工件厚度公差高可至T±0.002mm~±0.001mm～±0.0005mm系列。

6.表面粗糙度 高可至0.2μm~0.1μm~0.05μm~0.01μm系列。

We can make tools with any material, any shape,special kind, special type, abnormal shapeand precision and tolerance by mirror surface grinding according to your drawings or samples

Grinding for mirror surface,super sharp cutting edge

Super-hard processing of professional, special, non-standard, special shapedand newproducts with any kind, any shape and tolerance.

we can produce super long-wide-thick、high precision、complex profiling products according to requirements of drawings & samples.

(Super high wear-resistance /high impact-resistance/high precision)

Length L=5mm~6500mm series, Width B=2mm~800mm series, Thickness T=0.10mm~120mm series,

Flatness can be

1. Machined work piece's minimum thickness is up to T= 0.20~0.06mm(and its maximum thickness is up to more than 800mm)

2. Machined work pieces' minimum diameter is up to φD=φ0.006 ( and its maximum diameter is up to more thanφ600mm.)

3. Machined work pieces' maximum length is up to 6500mm (there is no limit for minimum length)

4. Flatness, parallelism, precision tolerance can be up to 0.005mm   ~0.002mm～0.001mm high.

5. Machined work piece's thickness tolerance is up to T±0.002mm~±0.001mm～±0.0005mm.

6. Surface roughness can be   up to 0.2μm~0.1μm~0.05μm~0.01μm high .