钨钢直柄T型三面刃铣刀,硬质合金直柄T型三面刃铣刀

钨钢直柄T型三面刃铣刀,硬质合金直柄T型三面刃铣刀

 

专业特殊、非标、异型、新产品、任意种类、形状、公差的超硬加工。

• 如有类似，可FAX地址，来电索取图片中的样品及相关样本资料供参考（只限小金额）※

常年備存原材料、半成品、成品 2000萬 ~ 3000萬RMB周转的在庫品，依圖依樣現生產，具有極強的性價比……欢迎实地指导。

 

【采用德国和瑞士先进的强力高速数控磨床及优质超强极超微粒钨钢（钻石钢）高精密（3DX技术）成型磨削，具有完美的刃口品质和高可至±0.001mm（±1μm）的尺寸公差。】

 

高耐冲击钻石钨钢（断续切削用）PRA11/VRA201系列

高硬度钻石钨钢（高耐磨用）HRF10/SR10T系列

ISO标准钨钢类（一般加工用）PR40/PRA5系列

 

高钴HSCo8（SKH59）、ASP60C德标

（DIN）系列全磨（2～6刃)端铣、（2～4刃）球铣

刃型：（标准及非标准1-12刃系列铣刀、铰刀）： 深沟型，圆头型，端角R型，空芯型，斜刃（锥度）型，长刃型，铝、铜专用，分屑槽（粗铣用）

 

刃径：（微小型）φ0.10 mm-φ53.00mm（整体钨钢）、φ20.00mm-φ80.00mm(焊刃式).

公差：（标准及非标准）钻石钨钢类刃径公差高要求的可至±0.001mm(±1μm)的精度范围，柄径公差均为h6以上

螺旋角：0°、25°、30°、35°、45°、50°、55°、60°

 

冷硬加工取代磨削可提高精度,硬铣削取代研磨可提高效率

(高硬度钢加工用非涂层钻石钢刀具可替代TiALN涂层超微粒钨钢、陶瓷、CBN刀具切削后具有极佳的光洁度及较低的刀具成本).

 

微小径和成型复合刀具可依图纸或样品加工

订货请注明: 名称(刃型)*刃数*刃径*刃长*柄径*总长*柄类*(斜度)*螺旋角*要求公差；

           拟加工材料，加工类型[超精→精,半精→半粗,粗加工→强力(重)切削]

HSC铣刀

1、刀具刚性好，能进行高效率的加工。

2、通用型，高精度产品，表面粗糙度≤Ra0.15μm。

3、采用先进的强力高速数控磨床高精密成型磨削，故有完美的刃口品质及精密公差。

4、斜度、刃数（2～6刃）、柄类、螺旋角、刃径、刃长、柄径、总长等可依要求加工。

 

部分材质说明：

HRF10极超微粒钻石钨钢:

具有极为优秀的耐磨耗性能，但抗冲击性能略差。适用于调质或淬火等高硬度材料（HRC45°~65°）的中低速或要求具有较高的耐磨性能及有色金属等各类材料的中低速轻切削加工。一般用于良好的工况、稳定的切削、优良的零件装夹及持续的轻型加工。相应ISO K10。

 

PR40:极超微粒钻石钨钢:

泛用型，可用于HRC≤28°各类材料的中低速粗切削至精切削加工，具有较为优秀的抗冲击性能和一般的耐磨耗性能，应用范围广。一般用于较厚的切削量、间断切削及较差的零件夹紧。涂层后效果较佳，可加工至HRC50°的各类材料，相应ISO K20。相应一般钨钢，具有1~2倍的使用寿命和极优秀的耐冲击性能。

 

确认被加工材料、硬度HRC、设备刚性（价值）、数量，可依图依样要求研磨成型角度及尺寸公差……只批量现生产，可完全替代国际一流制品，具有极高性价比！

 

從六轴、七轴联动CNC加工的（A级）高端产品到三轴、四轴生产的（B级）中端制品、不同等級的品質與價位......專業替代一流工业品、特殊、非標、異型、新產品中大批量、超高性價比的研發、生產加工，依圖依樣改進設計，可大大降低綜合成本！

  

询盘请能提供样品及参考页脚注明每种产品的详细要求、材料种类、尺寸公差、工件成品和半成品图纸、所用的设备、设备价值RMB（以判断其刚性及跳动等）、每月消耗的数量、原用产品类型及其不足之处？被加工材料及其硬度HRC?……

被加工的成品图、注意事项：并能提供使用效果最佳—新的和旧的实样。样品：是易钝化？易崩口？还是……？

 

拥有先进综合的生产体系，具备各种精密技术生产加工能力，实现高效率、低成本的应用。

 

 

carbide straight shank T type side and face milling cutter,hard alloy straight shank T type side and face milling cutter

 

 

Super-hard processing of professional, special, non-standard, special shaped and new  products with any kind, any shape and tolerance.

※If you have any similar inquiry, please fax us your address or call us to get samples in the photos and related catalogue for your reference (only a small amount is allowed). ※

We keep around RMB 20～30 Million turnover stock articles such as raw material ,semi-     products, finished products in ordinary year , we are capable to produce according to     drawing or sample provided by customer, so as to present you a favorable cost-performance  ratio…Welcome to visit our factory。

 

 

With excellent rigidity, tooling can conduct highly efficient machining.
1. General\high precision product, surface finish≤Ra0.15μm.
2. Adopting advanced power high speed CNC grinder to make high precision profile grinding,it has perfect blade quality & precision tolerance.
3. Inclination\number of flute (2-flute~6-flute)\type of holder\helical angle\flute length\holder diameter\overall length etc can be machined according to requirements.

 

Note: non-standard, and size will be produced according to the order.

 

Adopting advanced power high speed CNC grinder from Germany and Switzerland as well as high precision (3DX technology) grinding of high

 

High-impact-resistant diamond tungsten steel (for intermittent cutting)

High hardness diamond tungsten steel (for high wear resistance) HRF10/SR10T

Tungsten steel meeting ISO standard (for general machining) PR40/PRA5

High cobalt HSCo8(SKH59), ASP60 German standard (DIN) series complete grinding (2-flute~6-flute) end milling，

(2-flute~4-flute) ball milling

 

Type of flute: (standard and non-standard 1-flute~12-flute series mill, reamer): deep groove, round head, end angle R, hollow, oblique flute (tapered), long flute, for aluminum, copper application, chip-dividing groove (for rough mill application)

 

MRll diameter: (miniature) φ0.10mm---φ53.00mm (solid tungsten steel), φ20.00mm--φ80.00mm (brazing)

 

Tolerance: (standard and non-standard) tolerance of flute diameter of diamond tungsten steel can be up to ±0.001mm (±1μm) high, and tolerance of holder diameter is more than h6.

 

Helical angle: 0°,25°,30°,35°,45°,50°,55°,60°

 

Cold-hard machining replacing grinding can improve precision, hard milling replacing grinding can improve efficiency。

 

(Non-coated diamond steel tooling for high hardness steel machining can replace TiALN coated ultra micro-grain carbide, ceramics. After cutting, CBN tooling has excellent smoothness and lower tooling cost.)

 

Miniature and profile compound tooling can be machined according to drawing or sample

 

When placing an order, please indicate: name (flute type) ＊ number of flute ＊ flute diameter ＊ flute length ＊ holder diameter ＊overall length＊type of shank＊ (inclination) ＊ helical angle ＊ required tolerance

Material to be machined, Type of machining，Super-finish→ finish, semi-finish→ semi-rough, rough machining→ power (heavy) cutting

 

HRF10
ultra micro-grain quality carbide, has excellent wear resistance, but its impact resistance is not so good. It is applicable for medium and low speed cutting of high hardness materials(HRC45°-65°) requiring thermal refining and quenching or for various materials having higher wear resistance and non-ferrous metal. Generally it is applied in good working condition\stable cutting\excellent part fixing and continuous light machining. Corresponding to ISO K10.

PR40：

super micro-grain diamond tungsten steel, extensively applied, it can be applied in medium speed cutting and finish cutting of various materials with HRC≤28°. It has excellent impact resistance and general wear resistance, and has extensive application. Generally, it is applied for thicker cutting, discontinuous cutting and bad part fixture. After being coated, it has better result, can machine various materials of HRC50°. Comparing with ISOK20&general tungsten steel, it has 1-2 times lifetime and excellent wear resistance

From high-class products (via 6-axis/ 7-axis Blocking CNC-machine Tool (Class-AAA))to medium-class products (via 3-axis/ 4-axis Blocking CNC-machine Tool (Class-D)), different quality and price, our reliable products can replace to first-class products, and we are professional in wholesale, R&D, producing & processing, as well as design revision according to client's designs and samples of special, non-standard, abnormal shape and new products with high cost-performance ratio, also our on-demand service will decrease your comprehensive cost greatly!

 

Referencing to the page footer, please provide your sample and specify the detailed specification, material type, size tolerance, drawing of semi-product and finished product, applied equipment, equipment value (RMB, to judge its market value  is rigid or floating), monthly consumed quantity, type of original product and its deficiency, when you make inquiry. What is the processed material and its HRC? Work piece drawing and notes, and please supply us new and old bestperformed samples.

Samples: Is it easy to blunt or break or other problems?

 

LZQ is possessed of cutting-edge & comprehensive production system, as well as rich producing & machining capability with different precision technology, so as to realize high efficiency application.